Articles on this Page
- 08/03/15--09:10: _PPE OEM Replacement...
- 08/05/15--08:21: _PARETO POINT INDUST...
- 08/07/15--08:09: _Mp Tools Smart Coll...
- 08/07/15--11:32: _Kleinn 24-Volt Comp...
- 08/07/15--12:38: _Kleinn Train Horns ...
- 08/07/15--12:42: _Kleinn Train Horns ...
- 08/07/15--13:22: _Pilot Automotive an...
- 08/07/15--14:48: _"Scorpion Lo'k " A...
- 08/08/15--18:40: _Cange your oil clea...
- 08/10/15--06:34: _COLORBOND LEATHER, ...
- 08/10/15--17:40: _Kleinn Veloci-Rapto...
- 08/11/15--06:51: _Myers Tire Supply I...
- 08/11/15--13:42: _Powered by Bluetoot...
- 08/11/15--14:31: _DEI Introduces Refl...
- 08/12/15--10:44: _Grex Airbrush intro...
- 08/13/15--14:11: _DEI Introduces Onyx...
- 08/13/15--14:17: _TUFTRUCK'S Ram 1500...
- 08/13/15--14:20: _Design Engineering,...
- 08/13/15--14:22: _TUFTRUCK's Ram 2500...
- 08/13/15--14:27: _Heat Reflective Mot...
- 08/03/15--09:10: PPE OEM Replacement Up-Pipes for GM Diesels
- 08/07/15--08:09: Mp Tools Smart Collet Bearing Pullers
- 08/07/15--11:32: Kleinn 24-Volt Complete Onboard Air System
- 08/07/15--12:38: Kleinn Train Horns & Oboard Air for Super Duty Ford
- 08/07/15--12:42: Kleinn Train Horns & Onboard Air Systems for GM HD Diesel Trucks
- 08/10/15--06:34: COLORBOND LEATHER, VINYL & HARD PLASTIC REFINISHER (LVP)
- 08/10/15--17:40: Kleinn Veloci-Raptor™ Bolt On Train Horns for F-150
- 08/11/15--14:31: DEI Introduces Reflective Fuel Can Covers
- 08/12/15--10:44: Grex Airbrush introduces their new fan spray cap accessory
- 08/13/15--14:11: DEI Introduces Onyx Series™ Flexible Heat Shield
- 08/13/15--14:17: TUFTRUCK'S Ram 1500 Extra Heavy Duty Rear Coil Kit
- 08/13/15--14:27: Heat Reflective Motorcycle Fuel Tank Cover™ Now Available from DEI
Diesel engines (even stock) produce high temperatures and pressures. OEM up pipes eventually fail from constant temperature and pressure fluctuation.
PPE has taken the OEM replacement to a new level. PPE OEM Up-Pipes allow 53% greater flow over stock. PPE OEM Up-Pipes are a direct bolt-on to your factory manifolds. But unlike factory parts, PPE OEM Up-Pipes are manufactured from 11 gauge 304 stainless steel and include our superior PPE 304 stainless steel, internally-sleeved bellows that can take the abuse of high temperature and high pressure.
OEM length, left and right 304 stainless steel Up-Pipes, non-EGR, Race-Only.
▪ Significant reduction in exhaust back pressure
▪ Free-flowing stainless steel inner liner bellows
▪ Stainless steel 11-gauge .120-inch wall, 2-inch OD Up-Pipes
▪ Direct bolt-on replacement to factory manifolds
▪ Faster turbo response
▪ Lower exhaust temperatures
San Pedro, Calif., August 4, 2015 – After spending over a year developing new products and building relationships, Pareto Point Industries (PPI) is returning to exhibit at the 2015 SEMA Show. PPI makes and sells filtration systems that finely clean motor oil and hydraulic fluids in vehicles and other types of equipment. Finely cleaned fluids improve performance and extend service life, while reducing fuel and other O&M costs. This level of cleaning also markedly improves the environmental footprint, and reduces premature critical component failures.
Mp Tools would like to introduce our new lineup of our patented Smart Collet differential bearing pullers for 2015.
Easy, fast, safe! Our pullers are self-aligning and effortless to operate. The are simply the easiest, fastest, & safest pullers on the market, period! Used by top Nascar teams, all four major differential testing labs in the US, a major auto manufacturer in their prototype build lab and their axle production line & heavy truck shops such as Inland Truck Parts just to name a few new customers to date. We supply both standard tooling to cover most all auto & truck differential bearings as well and specialized tooling upon request.
Our tooling pays for itself in a matter of days due to the increase in productivity along with a safer method and better quality as well.
We supply both electric and manual hydraulic pullers and installers.
Stop by our booth and see the Smart-Collet pullers in action!
Mp Tools Smart Collet Bearing Pullers
Kleinn Air Horns’ 6354 Sealed Air System is the fastest complete, high pressure & high performance 24-volt air systems on the market. Intended for mobile pneumatic applications, this ground-breaking system features a 100% duty cycle, 24-volt air compressor that provides 150 PSI and creates 1.98 CFM at 0 PSI. This high performance 24-volt air system features a 3 gallon US Made air tank and everything you’ll need to provide plenty of flow at 150 PSI for most mobile applications. The system also includes all fittings, necessary parts and detailed installation instructions – all in one box. A 30-foot coil hose with deluxe carry bag is also standard and comes with everything needed to turn the system into a mobile tire fill station. For more information, please call (520) 579-1531, contact Kleinn Air Horns, 4045 N Highway Dr., Tucson, AZ 85705 or visit us online at www.kleinn.com.
Kleinn Air Horns introduces onboard air & train horn systems for 2011-2015 Ford F-250 and F-350 diesel trucks using US made, vehicle-specific brackets and air tanks. The complete lineup of SDKITS and SD OBA Systems feature 8 different SKUs with various versions of air horn and air compressor combinations that require no cutting, welding or drilling. All systems come with US Made, 11-gauge brackets that bolt to existing factory locations. Every system includes a sealed Kleinn air compressor and 3-gallon air tank. Kleinn Super Duty Systems use no cargo space and can be installed quickly with professional results. Custom-fit wiring is included that requires only a few simple connections. All systems ship with a Tire Inflation Kit to allow the system to do more. For more information, please call (520) 579-1531, contact Kleinn Air Horns, 4045 N Highway Dr., Tucson, AZ 85705 or visit us online at www.kleinn.com.
Kleinn Air Horns introduces onboard air & train horn systems for 2014-2015 GM 2500HD & 3500HD diesel trucks using US made, vehicle-specific brackets and air tanks. The complete lineup of HDKITS and HD OBA Systems feature 8 different SKUs with various versions of air horn and air compressor combinations that require no cutting, welding or drilling. All systems come with US Made, 11-gauge brackets that bolt to existing factory locations. Every system includes a sealed Kleinn air compressor and 3-gallon air tank. Kleinn Heavy Duty Systems for GM diesels use no cargo space and can be installed quickly with professional results. Custom-fit wiring is included that requires only a few simple connections. All systems ship with a Tire Inflation Kit to allow the system to do more. For more information, please call (520) 579-1531, contact Kleinn Air Horns, 4045 N Highway Dr., Tucson, AZ 85705 or visit us online at www.kleinn.com.
Two automotive aftermarket powerhouses, Pilot Automotive, a supplier of automotive products,
and Rolling Big Power (RBP), a luxury truck accessories brand, recently announced a
partnership to expand the availability of RBP products.
Pilot is one of the largest manufacturers/suppliers of aftermarket automotive accessories, with over 30 years in
business and extensive distribution. RBP, a boutique company started in Southern California, has become one
of the premier and most recognizable truck accessories brands in the country.
The integration of RBP into Pilot’s advanced infrastructure will lead to an enhancement in RBP’s supply and
service to the WD (warehouse distribution) segment of the industry. In addition, Pilot-RBP will introduce a new
and unique product offering for the specialty retail channel. The combination of Pilot’s distribution strength
coupled with RBP’s trendsetting designs, marketing, and customer loyalty, is certain to drive the truck
Reel Xclusive will debut the all new Scorpion Lo'k at the 2015 SEMA Show. The Scorpion Lo'k solves the problem of no parking brake on the Polaris line of UTV's. Scorpion Lo'k provides an easy to install and easy to use Hill / Transport Brake but also works as a Theft Deterent when needed. No more rolling back on the transmission when parked on a hill causing a bind on the shifter or damage to the internals of your Polaris UTV. When you must leave your vehicle alone Scorpion Lo'k can also be locked into the applied position with the easy push of a button. The vehicles brakes will be fully applied making it very difficult if not impossible to move the vehicle. Scorpion Lo'k acts as a Theft Deterent when the vehicle is left unattended. Events, Hunting , Camping, Parking Lots, even on the Trailer. Anywhere you have to leave your valuable Polaris UTV alone and unattended Scorpion Lo'k will give you a little extra piece of mind that your car will be there when you get back.
Stahlbus USA presents
The Stahlbus Oil Drain Valve replaces the existing drain plug and provides a faster, safer and cleaner way of performing oil changes. With the Stahlbus bleeder valve you have 30% better brake bleeding results and
without needing a second person .
LVP is an affordable, easy-to-use professional single stage interior paint that won't flake, crack or peel and dries in 45 seconds. LVP molecularly bonds to leather and a wide variety of plastic surfaces including TPO, PP, ABS and PC.
LVP has earned two worldwide Ford OEM performance specifications and has been accepted by tier one automotive manufacturing giants - JCI and Visteon. 168 contemporary OEM aerosol colors are available that include Ford, GM, Toyota, BMW and Mercedes.
Visit ColorBond in the Main Hall, booth #23793, for additional information and demos.
If you’ve got a 2009-2014 Ford F-150 or SVT Raptor, Kleinn Air Horns has a 100% bolt-on system designed specifically for your truck. We’ve taken the biggest, loudest and most insane horns we manufacture and added heavy duty air systems, made in the USA air tanks and designed brackets for your F-150 that do not require any modifications whatsoever! All five systems are installed with the air compressor and tank mounted to a heavy duty, 11-gauge, powder-coated steel bracket that attaches to the driver’s side frame rail using supplied ¾-inch hardened steel bolts. The systems use no cargo space whatsoever. A custom-fit wiring harness is included that requires only a few simple connections, making your installation speedy and painless. Also included is a tire inflation kit and quick connect couplers, so the system can do even more than shock the world with its insanely-loud train horns.
Ohio, USA – August 10, 2015 – Todays automotive and light truck service technicians are looking for products that are lightweight, faster to use, and with an ergonomical design. At 54 lbs., the Myers Tire Supply 3 Ton Aluminum Service Jack is lightweight, raises to full height in 5 pumps and features a two-piece padded handle for easy storage.
Myers Tire Supply Distribution, Inc., is a nationwide distributor of tools, equipment and supplies to tire, wheel and undercar service professionals. For more information, contact Myers Tire Supply at 800-998-9897 or email us at email@example.com.
Athens, IL. (August 11, 2015) – XKGLOW LLC., the company that established the Smartphone controlled LED lighting market in 2010, will debut their all-new Smartphone Controlled lighting system – XKchrome at the SEMA Show in 2015.
DEI Reflective Fuel Can Covers are designed to keep race fuel cooler and denser for maximum power. Now available from DEI in three sizes – 5 gallon Round, 5 gallon Square jug and 54 gallon Drum. Introduced with a new design, these covers are the ideal solution to protect expensive race fuel. Many manufacturers recommend covering race fuels, especially the new generation of Oxygenated fuels to prevent exposure to the sun’s UV rays and heat. DEI’s reflective fuel can covers reflect heat away from the can, keeping temperatures stable and extending the life of the fuel.
For more information about DEI’s Made in the USA Reflective Fuel Can Covers in 5 gallon Round (part #010467), 5 gallon Square jug (part # 010471), or DEI’s 54 gallon Drum (part # 010848), designed with a sewn-in handle for quick removal, visit www.DesignEngineering.com, call 800-264-9472, or visit DEI during SEMA at Booth #20013.
Grex Airbrush announces a brand new fan spray cap accessory for their current line of Tritium and New Genesis Airbrushes. This transforms the standard round spray pattern of an airbrush into an elongated fan spray pattern of a spray gun. A very useful and desired trait for laying down even coverage with less passes. The Grex fan spray caps are available for the 0.3mm, 0.5mm & 0.7mm nozzle sizes. They will be sold individually or packaged along side a full nozzle kit. They add even further versatility to an already highly adaptable airbrush system. For more information, visit www.grexairbrush.com or call 888-4GREXCO (888-447-3926).
Avon Lake, OH…DEI Powersports has launched the next generation of heat protection performance using a combination of advanced textiles and a reliable standoff bracket design. DEI’s new ONYX Series™ Flexible Heat Shield, available in a rich black finish, looks great and outperforms other conventional heat shields currently on the market.
For improved thermal performance, DEI joined two durable materials together to form a dual-layer design. The outer layer is made from heat-treated glass fiber impregnated with molten aluminum; formed into a tight weave for added durability and strength. The inside material is made of a specially treated, high temperature resistant fabric (89% silica) capable of withstanding extreme exhaust heat – up to 1350°F. The outer edge features a surge stitch for improved durability. All hardware is stainless steel.
This new kit is exactly what you need to make the most out of your Ram Truck. Whether its business or personal, the added durability and security that TUFTRUCK® Heavy Duty Coils add to this truck is far superior to OEM Coil Springs.
The TTC-1211 Extra Heavy Duty spring kit was designed keeping towing in mind and is built to provide rear-end support for your 2009 – 2015 Ram 1500 models. By using the TTC-1211, you will increase your carrying capacity by and/or add capacity to the tongue weight over the OEM coils.
The TTC-1211 will make your drive a bit stiffer, which may make your truck feel like a truck and not a car.
Extra Heavy Duty (XHD)
Avon Lake, Ohio…Design Engineering, Inc. (DEI) is pleased to announce Bill Herrmann has joined as vice president of operations. He joined the company in late June and will report direct to Design Engineering Inc. CEO, David Markley. Herrmann has over 30 years’ experience in industrial and chemical distribution, as well as, chemical and food manufacturing. He has spent most of his career within the supply chain procurement, logistics, forecasting, operations management and inventory control disciplines.
We are introducing a brand new coil spring for the brand new 2014-2015 Ram 2500/3500 Diesel four wheel drive models. These coils will give your RAM a 2”-2.5” lift to increase the front support of your Truck. This new kit is exactly what you need to make the most out of your Ram Truck. Whether its business or personal, the added durability and security that TUFTRUCK® Heavy Duty Coils add to this truck is far superior to OEM Coil Springs.
Heavy Duty (HD) – Diesel Engine
TUFTRUCK®s TTC-1224 heavy duty front coil spring kit is specially engineered to provide a 2”-2.5” lift, noticeably increasing the front end support of your 2014-2015 RAM 2500 Diesel 4WD and/or 2013-2015 RAM 3500 Diesel 4WD. The TTC-1224 was designed with the serious truck owner in mind. This Heavy Duty coil spring kit is sure to give you the additional weight capacity you are looking for by providing superior load support as compared to your OEM coils.
Avon Lake, OH…DEI’s new Motorcycle Tank Cover™ reflects up to 90% of the sun’s heat away from the fuel tank to help keep fuel temperature stable. Just as racers are known to use tire warmers to maintain tire temperatures between race sessions, in motorcycle racing it is equally important to maintain stable fuel temps for maximum horsepower. Hot fuel greatly increases fuel pump stress and can cause vapor lock and most race fuel manufacturers recommend keeping fuel cool for maximum performance; especially important with the new oxygenated fuels.
DEI’s slip-on, one size fits all fuel tank cover is made of 2mm felt-backed Mylar material. The cover can be installed or removed in seconds and will not scratch or harm the fuel tank. For racers looking for maximum power and fuel efficiency, this is the low cost way to keep fuel from baking in the sun and losing combustion due to extreme heat.