Quantcast
Channel: Power Sports & Utility Vehicles
Viewing all 705 articles
Browse latest View live

NEW OptiMate 5 Start-Stop Battery Optimizer

$
0
0
Company Media Contact Information
Media Contact Name: 
RON CARTER
Media Contact E-Mail: 
Media Contact Phone: 
5416399800
Company: 
Tecmate
Booth #: 
38009

Increasing numbers of vehicles are using automatic stop-start systems, to help lower emissions and fuel consumption, but these can put enormous strain on the battery. The new OptiMate 5 START-STOP battery optimizer is designed to provide completely safe charging and maintenance for the 12V EFB and AGM batteries fitted to modern cars & vans.

Stop-start vehicles are equipped with the latest EFB (Enhanced Flooded Batteries), which are more powerful and durable than standard flooded / wet cell batteries. However, regular use – especially in heavy traffic and in busy urban situations – puts the battery under enormous pressure. A vehicle with stop-start can be expected to go through over 500,000 stop-start cycles over its lifetime, compared to the 50,000 cycles a traditional vehicle will perform.

read more


OptiMATE Lithium 4s 9.5A / 5s 7.5A

$
0
0
Company Media Contact Information
Media Contact Name: 
RON CARTER
Media Contact E-Mail: 
Media Contact Phone: 
5416399800
Company: 
TECMATE
Booth #: 
38009

The ultimate professional battery charger for 12.8V/16V Lithium batteries
OptiMate Lithium LFP Select is perfect for high performance 12.8V (4s) and 16V (5s) LiFePO4 / LFP batteries that demand fully automatic, fast and accurate temperature controlled charging. Perfect for 12.8V / 16V LiFePO4 / LFP batteries sized from 2.5 to 200 Ah. Power saving stand-by mode. Full electronic protection against errors.

Special features:
Battery SAVE mode with BMS reset : starts from 0.5V with continuous monitoring / testing of charge acceptance or bad / shorted cell condition. Unnecessary (and unsafe) charging of a bad battery is prevented.
safeTº :Automatic charge rate adjustment to ambient temperature sensed at the charger. Reduced charging below freezing, no charging if temperature is below -20ºC/-4ºF (can damage lithium batteries).
Ampmatic : Microprocessor adjusts current to ideal LiFePO4 charge curve to match battery size / condition, for fastest and most complete charge.

read more

Savior Products Signs 4 Manufacturer's Reps

$
0
0
Company Media Contact Information
Media Contact Name: 
Brock Templeman
Media Contact E-Mail: 
Media Contact Phone: 
9135682732
Company: 
Savior Products, Inc.
Booth #: 
36171

Lenexa, KS (June 27, 2017) – Savior Products, Inc., the maker of Savior Battery Cases and Trays, has signed manufacturer rep agreements with Bob Cook Sales, Bowdoin Marketing, KAM Marketing, and R&R Marketing Consultants to handle representation throughout the USA and Canada of the newly launched Savior Battery Cases and Trays product line.

“We put a priority on hiring the best representation in the industry to help us launch the Savior product line. When you look at their track records we’re confident we accomplished that.”
-Jon Templeman, Founder & CEO, Savior Products, Inc.

In addition to the four recently-signed automotive manufacturer’s reps that handle the USA and Canada, Global Marine Associates represents the Savior product line overseas throughout the European marine market. Collectively, the group has been awarded SEMA Rep of the Year 15 times.

read more

Savior Products Makes SEMA Launch Pad Semi-Finals

$
0
0
Company Media Contact Information
Media Contact Name: 
Brock Templeman
Media Contact E-Mail: 
Media Contact Phone: 
9135682732
Company: 
Savior Products, Inc.
Booth #: 
36171

Savior Products, Inc., the maker of Savior Battery Cases and Trays, has been selected as a semi-finalist in the SEMA Launch Pad Competition. The competition began with 110 qualified companies and has been narrowed down to the top-15.

“The SEMA Launch Pad Competition will create tremendous brand exposure for the new Savior product line. Our motto is ‘We don’t like to compete. We just like to win.’ However, just competing at this stage in the Launch Pad Competition already feels like we’ve won.”
-Brock Templeman, President, Savior Products, Inc.

The next stage of the SEMA Launch Pad Competition is a Facebook video voting contest that runs from July 18th – September 4th with the top-10 vote-getters being names as Finalists who will have an opportunity to compete live at the 2017 SEMA Show for a panel of industry-icon judges.

read more

Epsilon Electronics Inc. Introduces All-New ATV6 All-Terrain Vehicle Audio System For Power Acoustik Brand

$
0
0
Company Media Contact Information
Media Contact Name: 
Monika Earle
Media Contact E-Mail: 
Media Contact Phone: 
323-722-3333 ext. 295
Company: 
Soundstream
Booth #: 
1000

Montebello, CA (July 10, 2017) – Epsilon Electronics Inc. has introduced a brand new all-terrain audio system as part of their iconic Power Acoustik brand.

Part of Power Acoustik’s growing powersports line, the ATV6 and ATV6L are easy to install and includes a marine-grade waterproof 6.5” coaxial speaker and a 1” extended frequency tweeter.
 
“This source unit is a worthy addition to our Power Acoustik product lineup,” said Epsilon Vice-President, Sales & Marketing, Paul Goldberg. “This product contains a wide variety of standard features our customers have come to expect.”

Unlike other ATV sound systems, the ATV6L models includes LED lighting as standard equipment as opposed to an upgrade.

This unit is equipped with Bluetooth V4.0 MP3 audio streaming from mobile devices to allow for increased accessibility when riding off-road.

read more

Skull Krushers Offroad, Inc. Launches Full Sales and Distribution of its First Customizable Inner Fender Liners

$
0
0
Company Media Contact Information
Media Contact Name: 
Skull Krushers Offroad, Inc
Media Contact E-Mail: 
Media Contact Phone: 
(800) 837-1597
Company: 
Skull Krushers Offroad, Inc.
Booth #: 
51044

(Baytown, Texas) July 18, 2017 – SKULL KRUSHERS OFFROAD, INC. announces that they have launched full-scale sales and distribution of their first custom inner fenders for Jeep offroad vehicles. The Company is now fulfilling orders throughout the United States, Canada, and Dubai. Skull Krushers has the ambition to become a premier one-stop shop for all Jeep customization needs, and the launch of their first inner fender is a huge step in their growth process.

“This is a big milestone for Skull Krushers. To see our passion project actually developing into a full-scale custom accessory brand has been a fun ride,” said Skull Krushers’ CEO Ben Port. “When we first started ‘tricking’ out our Jeeps, we knew that we could be heading down a deep rabbit hole, but we had no idea it would lead to this…”

read more

Kryptek® 3D Camouflage Now Available On Coverking® Skanda® Line Of Tactical/Camo Seat Covers

$
0
0
Company Media Contact Information
Media Contact Name: 
Coverking
Media Contact E-Mail: 
Media Contact Phone: 
800 268-3754
Company: 
Coverking
Booth #: 
20313

Inspired by 3D artillery camouflage, Kryptek® stealth designs are some of the most advanced camo patterns used by the U.S. Department of Defense. These same military patterns are now available on Coverking’s Skanda® line of tactical and camo seat covers.

Coverking’s Kryptek® seat covers are made with 500 Cordura Ballistic fabric which provides a high-level of protection against abrasions, tears and accidental punctures. The material is also UV treated and features a water-resistant lining that helps to reduce rotting, mildew and stains. Manufactured using precise 3D scanning, the Kryptek® seat covers are easy to install and perfectly fit the contours of the vehicle’s seat. Depending on the application, the seat covers come complete with headrest, armrest and center seat/console covers and utilize heavy-duty zippers and fasteners.

read more

T Mark Tools-Sockets and Wrenches for the finishing touch.

$
0
0
Company Media Contact Information
Media Contact Name: 
Mark Carli
Media Contact E-Mail: 
Media Contact Phone: 
407-416-9412
Company: 
T Mark Tools LLC
Booth #: 
51310

T Mark Tools, located at booth 51310, will be making its first appearance at this year’s 2017 SEMA Show. Mark Carli, the creator of T MARK® Tools, grew up around different car projects as well as his own restorations. After a lot of frustration and not finding anything on the market to fit a craftsman's needs, he started to work toward what is today T Mark Tools; a company providing finishing tools that will NOT scratch chrome nuts and bolts. Come by the Performance Pavilion, booth 51310, and see for yourself the state-of-the-art line of non-metal sockets and wrenches. As a first time exhibitor, T Mark Tools is excited to share its products and solve your problems.


Skull Krushers Offroad, Inc. Announces Portion of Profits Will Go To Support Veterans and Military Families

$
0
0
Company Media Contact Information
Media Contact Name: 
Skull Krushers Offroad Inc
Media Contact E-Mail: 
Media Contact Phone: 
(800) 837-1597
Company: 
Skull Krushers Offroad Inc.
Booth #: 
51044

(BAYTOWN, Texas) July 26, 2017 – SKULL KRUSHERS OFFROAD, INC. announces that a portion of the company’s profits is donated to like-minded organizations that support veterans and military families. Skull Krushers supports U.S. veterans and military families, and many of the company’s products reflect this support. Beyond designing products that encourage U.S. patriotism, the Company is giving back to the men, women and families that have served our country.

“We are a very new company and brand within the Jeep community, but we want to make sure that our customers know where we stand from the beginning,” said Skull Krushers’ CEO Ben Port. “It’s very important to us that we are giving back.”

Jeep was founded in 1941 as a military vehicle during WW2. Jeep was then introduced to the general public in 1945. Since that time Jeep has become one of the most customized vehicles in the world.

read more

ATV/UTV Replacement Radiators

$
0
0
Company Media Contact Information
Media Contact Name: 
Candace Grabinger
Media Contact E-Mail: 
Media Contact Phone: 
320-214-5110
Company: 
Northern Radiator
Booth #: 
20257

ENHANCED LINE WITH COMPETITIVE AFTERMARKET PRICING
ATV/UTV Replacement Radiators

Willmar, MN, August 1, 2017– The entire line of All Terrain and Utility Terrain Vehicles has been enhanced. Now announcing a full line of direct replacement radiators at competitive pricing in time to get at the forefront of this rapidly growing aftermarket.
The line includes all popular and hard to find applications for the ATV/UTV enthusiast. The timing of this program offering parallels nicely with the direction that the UTV market is heading.
Applications available include: Arctic Cat, Bobcat, Bombardier, Club Car, Cub Cadet, Honda, John Deere, Kawasaki, Kubota, Polaris, Suzuki, and Yamaha
Products available include: Radiators, Electric Fan Kits, and Heater Units
This product line expansion with new aftermarket pricing is part of Northern Radiator’s continuing effort to be the leading aftermarket complete cooling system source.

read more

Turbosmart 20 Year Anniversary Celebration at SEMA

$
0
0
Company Media Contact Information
Media Contact Name: 
James Horton
Media Contact E-Mail: 
Media Contact Phone: 
+61 02 9740 2802
Company: 
Turbosmart
Booth #: 
37213

Turbosmart, now rolling on a 12-year attendance at SEMA, has three times as many reasons to be excited about their participation at this year's event.

This year not only marks another year of joining the SEMA Show in Las Vegas, but also rests on the 20 year anniversary of Turbosmart’s incorporation. Further to this, it has now been 10 years since Turbosmart established their own American division to the business, one of the most significant milestones since the business first started 20 years ago.

In the last few years, Turbosmart’s US office has grown in leaps and bounds under the leadership of Marty Staggs, Executive Vice President, Turbosmart USA LLC.

“Our success as a business has been built off the back of our continual commitment to our customers. We pride ourselves on making reliable, quality built performance parts for the industry. And we will continue to build on this into the future”, says Staggs.

read more

Dan-Am Air®Advanced Aluminum Air Pipe System

$
0
0
Company Media Contact Information
Media Contact Name: 
Brad Gravenhof
Media Contact E-Mail: 
Media Contact Phone: 
800-533-8016
Company: 
DanAm Air
Booth #: 
10609

Today’s clean air requirements are more critical than ever. Air tools, blow driers, HVLP spray guns, and supplied air respirators may require more air volume and better air quality than needed in the past. Not only does clean air effect equipment performance, but it is also critical for paint coatings performance. Dan-Am Air, along with SATA filtration can solve all of these issues.
Dan-Am Air is lightweight, aircraft grade, powder coated aluminum, which provides clean, dry air up to 232 psi. The reinforced composite Nylon fittings have dual seals, which rest on un-scraped pipe, providing a leak free guarantee. Our Press-to-Connect fittings feature a full bore design for turbulence free air delivery. This quick, instant connection eliminates the need to thread, solder or glue, accounting for far less installation times than traditional copper or black pipe.

read more

BOLT Lock Debuts 2018 Jeep Wranger JL and Jeep Renegade Products

$
0
0
Company Media Contact Information
Media Contact Name: 
Shari Arfons
Media Contact E-Mail: 
Media Contact Phone: 
330-244-9980
Company: 
BOLT Lock
Booth #: 
33169

MILWAUKEE – BOLT® Locks is debuting select “One Key Lock Technology” lock products from its line for the 2018 Jeep Wrangler JL and Jeep Renegade models at the 2017 SEMA Show, booth #33169 located on the top floor of South Hall. The durable and precision locks are made specifically for these popular Jeep models and work with Jeep’s center cut keys to offer convenient security.

Initially, BOLT will offer its Receiver Locks, Coupler Pin Locks, Padlocks, Cable Locks, and Off-Vehicle Coupler Locks that can be used to secure trailers as well as other gear. Both newly designed Jeep models offer a combination of modern style with an abundance of functionality and ruggedness to handle both everyday activities as well as weekend excursions. BOLT Locks are a tough and reliable aftermarket accessory item to help Jeep owners secure their valuables.

read more

The Kneeler Pad cushions hard surfaces

$
0
0
Company Media Contact Information
Media Contact Name: 
Andrea Hindt
Media Contact E-Mail: 
Media Contact Phone: 
800-533-8016
Company: 
SATA Spray Equipment/Dan-Am Company
Booth #: 
10609

The padded Dan-Am Kneeler is ideal for any job requiring a technician to kneel down on hard surfaces. According to the company, the kneeler allows a technician to comfortably kneel on a grated paint booth or concrete floors for masking or painting vehicles down low, and washing and detailing. The pad is light, durable, and easy-to-clean with soap and water, while it is not affected by paint thinner or acetone used to remove paint overspray.

Visit our booth SATA Spray Equipment/Dan-Am Company #10609 at the SEMA Show
For more information call us at 800-533-8016 or www.satausa.com

ZROADZ Full Assortment of Dynamic Led Mounting Solutions Now Available for the 2017 Ford F-150 Raptor

$
0
0
Company Media Contact Information
Media Contact Name: 
Micah Anderson
Media Contact E-Mail: 
Media Contact Phone: 
9512705388 Ext. 310
Company: 
T-REX Grilles
Booth #: 
35033

ZROADZ Full Assortment of Dynamic Led Mounting Solutions Now Available for the 2017 Ford F-150 Raptor

The New 2017 Ford F-150 Raptor is one heck of a fully loaded and off road ready ultimate pickup truck. Raptor Truck Clubs have been created all over the country, and similar to Jeep Enthusiast, Raptors are being used for all types of vehicle recreation including “Overland Adventure”, “Rallys”, “Hooning” and just plain out having a good time. No matter what, Raptors are a new favorite to modify & customize.

The hottest category to upgrade, besides Wheels and Tires, is to add aftermarket Off Road LED Lighting.

ZROADZ is the innovative market leader in Dynamic LED Mounting Solutions and now has brought to market a full assortment of mounts & brackets specifically designed for the 2017 Ford Raptor, many of which have been made compatible to fit standard LED Light Bars of varying lengths.

read more


Do-It-Yourself Engine Coating Kit Brings Ceramic Coatings to the Masses

$
0
0
Company Media Contact Information
Media Contact Name: 
Tim Sampson
Media Contact E-Mail: 
Media Contact Phone: 
(865)773-0599
Company: 
Tech Line Coatings Inc.
Booth #: 
23619

Now anyone can coat Pistons, Bearings, Valves, Valve Springs, Cylinder Walls and more.

Ceramic coatings continue to be the best way to manage heat, reduce friction, increase power and extend part life. These cutting-edge coatings have only been available to professionals…until now.

These are the same coatings used by manufacturers, coating facilities, and race teams. Water-based coatings contain no hazardous solvents, no VOCs. Save time and money by applying performance coatings in your shop or at home.

The Engine Coating Kit contains:
CBC-1 Thermal Barrier Coating for piston tops, valve face, cylinder head, combustion chamber;
DFL-1 Dry Film Lubricant Coating for piston skirts, valve stems, valve springs, main/rod bearings, cams, gears;
PKSX Dry Powder Lubricant for cylinder walls, lifter bores and valve guides;
UltraGel Assembly Lubricant (used by top fuel teams) for cam, lifters, gears and more.

read more

Hard Korr® Lighting, all the way from down under

$
0
0
Company Media Contact Information
Media Contact Name: 
Chris Salvatore
Media Contact E-Mail: 
Media Contact Phone: 
+1 (818) 482 5160
Company: 
Hard Korr Lighting
Booth #: 
16729

Hard Korr® Lighting manufacture and supply LED Lighting for the retail light industry. Hard Korr® product range covers Automotive, 4x4, Truck, Marine, Machinery, RV and Camping Industries. Hard Korr® also supply the manufacturing industry who are constantly looking for new and innovative products and companies that are willing to support them to help manufacture top of the line products.

Hard Korr® Lighting prides itself on delivering the highest quality products delivering great customer service, support and product. Hard Korr® Lighting are pioneers in the LED lighting and portable solar power industry in Australia. We design, manufacture and supply a range of products that are unrivaled in quality, durability and value for money in the Australian market. We are at the forefront of technology, continually refining and adding to our range.

read more

Electra Meccanica Shows Off SOLO at 2017 SEMA Show - All-electric, single-passenger vehicle to transform daily commuting

$
0
0
Company Media Contact Information
Media Contact Name: 
Jeff Holland
Media Contact E-Mail: 
Media Contact Phone: 
5626401758
Company: 
Electra Meccanica
Booth #: 
50842

Electra Meccanica Vehicles Corporation (EMV) will show off its new 2017 SOLO electric vehicle (EV) at the Specialty Equipment Manufacturer Association’s (SEMA) show being held in Las Vegas from October 31 through November 3, 2017. After years of development, this one-person, innovative commuter vehicle is now available for the American viewing public to experience following its world debut in Vancouver last year. Fully-refundable deposits for the SOLO can be placed online at electrameccanica.com.

“The entire team here at Electra Meccanica is excited to unveil the SOLO at the SEMA show,” states Jerry Kroll, CEO of Electra Meccanica. “We encourage enthusiasts as well as any specialty equipment manufacturers to come over to our booth #50842 at the show and see this amazingly transformative commuter vehicle.”

read more

AEM Series 3 Standalone ECU Platforms Available for Ford, GM & Mopar EFI & TBI V8s!

$
0
0
Company Media Contact Information
Media Contact Name: 
Lawson Mollica
Media Contact E-Mail: 
Media Contact Phone: 
3104842322
Company: 
AEM Performance Electronics
Booth #: 
24313

Want to run your engine on programmable EFI on a budget? Here’s your best choice!
State-of-the-art engine control for only $999.00

Hawthorne, CA— AEM has released the Infinity Series 3 Programmable ECU platform for popular early- and late-model throttle body and port injected Ford, GM and Mopar V8s. The new Series 3 ECUs are simplified engine controllers designed to run a race, marine or crate engine without the need for, or cost of, additional features like variable cam control, Drive-by-Wire throttle control or internal wideband air/fuel sensor controllers. Initial release of the Series 3 includes the Infinity 308 (PN 30-7113) and Infinity 358 (PN 30-7114). Both Infinity Series 3 systems are offered at a special introductory retail price of only $999.00. Once this promotional introductory price ends, The Infinity 308 will retail for $1,198.00 and the Infinity 358 will retail for $1,248.30.

INFINITY 308

read more

BIGFOOT #1 & BOB CHANDLER MAKE RARE PUBLIC APPEARANCE DURING 2017 SEMA SHOW!

$
0
0
Company Media Contact Information
Media Contact Name: 
Marc Lewis
Media Contact E-Mail: 
Media Contact Phone: 
562-921-0404 x202
Company: 
Hedman Hedders
Booth #: 
22343

Whittier, Calif. (August, 2017) – It is impossible to tell the story of the Monster Truck and monster truck racing without mentioning the BIGFOOT® Monster Truck. From stadium shows to the big screen (Roadhouse, Cannonball Run), no other monster truck has a worldwide following as vast as the BIGFOOT Monster Truck. And although Bob Chandler’s BIGFOOT Team is working on BIGFOOT #22, there will never be another BIGFOOT #1.

read more

Viewing all 705 articles
Browse latest View live




Latest Images